Minebea Intec X3 Process Indicator PR 5410 - Starting the Application; Configuration Via a Notebook;Pc; Configuring Production Mode

8.3 Starting the application
Requirements:
- The "EasyFill" application has been selected; see Chapter 7.17.3.
Procedure:
8.4 Conguration via a notebook/PC
8.4.1 Conguring production mode
The following modes are congured under the [Conguration mode] menu item:
- Filling mode
- Interaction mode
Press the [Start] softkey.
The menu opens.
8 Production X3 Process Indicator PR 5410
EN-253 Minebea Intec