Minebea Intec X3 Process Indicator PR 5410 User Manual

Note:
* Err 31 appears on the display if the digit group for the IP address/mask is not
within 0–255, or is invalid.
7.5.11 Displaying the network address using the front-panel keys
7.6 Displaying/deleting alibi entries using the front-panel keys
The alibi memory of the device can be displayed and/or deleted directly using the front-
panel keys.
1. Press .
SEtuP appears on the display.
2. Press OK.
The "Cd" calibration menu ashes.
Cd 000 appears on the display.
3. Press multiple times to select "nP 080."
4. Press OK.
dHCP (DHCP) appears on the display.
5. Press OK.
on appears on the display.
6. Press OK.
nP 081 appears on the display.
7. Press OK.
IP.Addr appears on the display.
8. Press OK.
The more signicant part of the address 172.024. (example) appears on the
display.
9. Press to display the less signicant part of the address.
020.128. (example) appears on the display.
10. Press "Exit" multiple times to exit the Setup menu.
X3 Process Indicator PR 5410 7 Commissioning
Minebea Intec EN-142

Minebea Intec X3 Process Indicator PR 5410 Specifications

General

Brand	Minebea Intec
Model	X3 Process Indicator PR 5410
Category	Touch Panel
Language	English