Minebea Intec X3 Process Indicator PR 5410 - Configuring Printout

8.4.4 Conguring printout
The printout is congured under the [Conguration printing] menu item.
8. Press the [Yes] softkey to save the changes.
1. Select [Conguration printing] and conrm.
The conguration window appears.
2. Select [Number printouts], enter the number of printouts between 110, and conrm.
3. Select [Sequence number], change the sequence number if necessary, and conrm.
4. Select [Use NLE]. Check the ☑ box to activate printing with NiceLabelExpress.
5. Select [Line 1][Line 6] and conrm.
A selection window opens.
X3 Process Indicator PR 5410 8 Production
Minebea Intec EN-262