Minebea Intec X3 Process Indicator PR 5410 - Operating Parameters

7.17.3 Operating parameters
The operating parameters are set under this menu item.
Open the menu via -[Operating parameter].
1. Select [Date & Time] and conrm.
The following window opens:
2. Select the individual digits and use the keypad to overwrite them and conrm.
3. Select the individual digits and use the keypad to overwrite them and conrm.
4. Press to exit the menu and save.
X3 Process Indicator PR 5410 7 Commissioning
Minebea Intec EN-216