Minebea Intec X3 Process Indicator PR 5410 User Manual

8.2.2 Conguring interaction mode using the front-panel keys
You can select between the following interaction modes:
- Remote control via OPC/ModBus and/or eldbus
- VNC (Virtual Network Computing)
- Front-panel keys
Note:
See also Chapter 8.4.1.3.
8.2.3 Conguring digital inputs and outputs using the front-panel keys
Note:
See also Chapter 8.4.2.
Conguring digital inputs
1. Press .
SEtuP appears on the display.
2. Press OK.
The "Cd" calibration menu ashes.
Cd 000 appears on the display.
3. Press multiple times to select "IM 151."
4. Press OK.
IModE appears on the display.
5. Press OK.
??? appears on the display.
6. Press to select the desired mode.
7. Press "Exit" to exit the Setup menu.
1. Press .
SEtuP appears on the display.
2. Press OK.
The "Cd" calibration menu ashes.
Cd 000 appears on the display.
X3 Process Indicator PR 5410 8 Production
Minebea Intec EN-248

Minebea Intec X3 Process Indicator PR 5410 Specifications

General

Brand	Minebea Intec
Model	X3 Process Indicator PR 5410
Category	Touch Panel
Language	English