Minebea Intec X3 Process Indicator PR 5410 - Selecting and Configuring RS-485 Interface

The available interfaces are visible under -[Show HW-slots].
7.16.2 Selecting and conguring RS-485 interface
Note:
The PR 5510/04 interface card must be installed in the device (see Chapter 4.6).
1. Select -[Serial ports parameter]- [xBPI-Port] and conrm.
The following window opens:
2. Select the desired interface and conrm.
3. Press the [Param] softkey.
The following window opens:
X3 Process Indicator PR 5410 7 Commissioning
Minebea Intec EN-194