3 Device description
3.1 General information
The device is equipped with a 6-position, 7-segment display and additional status
indicators. Local operation can be carried out using 6 dual-function keys.
The device contains two applications:
- Standard
- EasyFill
Most functions are supported by both applications.
Some functions depend on the application.
3.2 Overview of the device
- Accuracy 10,000 e (class III) for the weighing electronics
- High-speed conversion with measurement times from 10 msec
- Weight display with status via transective, 6-digit, 7-segment display
- Alibi memory
- 6 function keys for operation on the front panel
- Enclosed front: IP65, back: IP30
- LAN adapter with 10/100 Mbit/s for data transfer, calibration, parameterization
- Integrated RS-232 interface for, e.g., printer or remote display
- Can be expanded using the following plug-in cards (2 slots):
- Serial input and output board 2× PR 5510/02 or 2× PR 5510/04
1× PR 5510/02 and/or 1× PR 5510/04
- Analog input and output board PR 5510/07
- BCD output board PR 5510/08 or PR 5510/09
- Opto-decoupled input and output board PR 5510/12
- Fieldbus cards PR 1721/3x
- Electrically isolated interfaces (except RS-232)
- Wide range power supply for 100 to 240 V AC, protection class I (protective
grounding conductor)
- Version PR 5410/01 for 24 V direct current
- Plug-in connections inside the device for load cells, inputs/outputs, LAN adapter
- Installation as control panel or control cabinet device
- Calibration using the front-panel keys or PC tool (browser/VNC); calibration of
Pendeo® load cells using the PC tool only
- Calibration using weights according to the mV/V method or directly using load cell
data (smart calibration)
- Software conguration of the interface cards, e.g., for remote display or printer
3 Device description X3 Process Indicator PR 5410
EN-15 Minebea Intec
To Next Page
Loading...
Need help?
General