Minebea Intec X3 Process Indicator PR 5410 User Manual

X3 Process Indicator PR 5410
Instrument Manual
Translation of the original instrument manual 9499 050 54103 Edition 11.1.0 10/23/2017
Release 4.50
Minebea Intec GmbH, Meiendorfer Str. 205 A, 22145 Hamburg, Germany
Phone: +49.40.67960.303 Fax: +49.40.67960.383

Minebea Intec X3 Process Indicator PR 5410 Specifications

General

Brand	Minebea Intec
Model	X3 Process Indicator PR 5410
Category	Touch Panel
Language	English

Summary

Instrument Manual

X3 Process Indicator PR 5410 Instrument Manual

Comprehensive manual for the X3 Process Indicator PR 5410, covering operation, installation, and maintenance.

Introduction and Safety Instructions

General Safety, Intended Use, and Startup Procedures

Covers general safety regulations, intended use, incoming goods inspection, and pre-operational checks.

Device Description and Installation

Device Installation Procedures

General guidelines, mechanical preparation, EMC compliance, and hardware connections for installation.

Analog Load Cell and Platform Connections

Instructions for connecting analog load cells and platforms with different wiring configurations.

Fieldbus Interface Installation and Configuration

Setup and configuration for various fieldbus interfaces like ProfiBus-DP, DeviceNet, CC-Link, ProfiNet, and EtherNet/IP.

Application Modes and Commissioning

Commissioning, Calibration, and Network Setup

Detailed guide to commissioning, calibration, parameter setup, and network configuration.

Extended Functions and Communication Protocols

Device Reset and Software Updates

Procedures for resetting the device to factory settings and updating its software using FlashIt!.

Technical Specifications and Appendix