Minebea Intec X3 Process Indicator PR 5410 User Manual

Save the data with [Yes].
Press [No] to exit the menu without changing data.
If a printer has been connected and set up (see Chapter 7.17.1.1), the conguration
printout can be triggered via the and keys (clicked one after the other).
7.17.5 Fieldbus parameters
The eldbus parameters are set under this menu item.
Open the menu via -[Fieldbus parameter].
This menu item can only be selected if a eldbus card is installed.
The protocol displayed automatically depends on of the installed eldbus card:
- [ProBus-DP] for PR 1721/31
- [InterBus-S] for PR 1721/32
- [DeviceNet] for PR 1721/34
- [CC-Link] for PR 1721/35
Note:
This eldbus card does not support the "EasyFill" application.
- [ProNet I/O] for PR 1721/36
- [EtherNet-IP] for PR 1721/37
Example:
PR 1721/36 ProNet I/O
X3 Process Indicator PR 5410 7 Commissioning
Minebea Intec EN-220

Minebea Intec X3 Process Indicator PR 5410 Specifications

General

Brand	Minebea Intec
Model	X3 Process Indicator PR 5410
Category	Touch Panel
Language	English