Minebea Intec X3 Process Indicator PR 5410 - Inputs and Outputs

9.1.4 Inputs and outputs
There are dierent modes for testing the analog and digital inputs and outputs:
- Test mode "Monitor"
- Test mode "Internal"
- Test mode "External"
1. Plug the test connector (see Chapter 18.2) into the RS-232 interface.
2. Select the interface and conrm.
- passed = ok
- failed (no data) = error
The results are displayed:
3. Press to return to the previous window.
X3 Process Indicator PR 5410 9 Extended functions
Minebea Intec EN-266