Minebea Intec X3 Process Indicator PR 5410 - Page 187

— ext.adj.w.pres.wt.
— internal adjust
— ext.lin.w.fact.wt.
— ext.lin.w.pres.wt.
— Conrm preload
— Delete preload
— adjust disabled
— Conrming adjust.
— automatically
— manual
— Zero range
— 1% of max load
— 2% of max load
— 5% of max load
— 10% of max load
— Power-On zero range
— factory settings
— 2% of max load
— 5% of max load
— 10% of max load
— Power-On tare/zero
— active
— inactive
— only for zeroing
— Measure rate
— normal output
— fast output
— Calibration check
— O
— Calibration prompt
— External adjustment
— Accessible
— Blocked
— Maximum capacity
— reduced by preload
— constant
— Application Tare
— Accessible
— Blocked
— Number of units
— 1 weight unit
— 2 weight units
— 3 weight units
— Weight unit 1…3
— Grams g
— Kilogram kg
— Carat ct
— Pound lb
— Ounce oz
7.15.5.2 Application settings
[Application settings]
7 Commissioning X3 Process Indicator PR 5410
EN-185 Minebea Intec