Minebea Intec X3 Process Indicator PR 5410 - Page 211

7.17.1.2 Remote display protocol
4. Select parameters and conrm.
5. Select and conrm the desired printer settings in the respective selection window.
6. Press to return to the previous window.
7. Press the [Cong] softkey to dene the print settings.
The following window opens:
8. Select parameters and conrm.
9. Select and conrm the desired printer settings in the respective selection window.
10. Press two times to exit the menu and save.
7 Commissioning X3 Process Indicator PR 5410
EN-209 Minebea Intec