Symbols/mass unit Description
Value not permissible in legal metrology
(e.g.,‑10-fold resolution, deactivated load cell).
R1 Range 1
R2 Range 2
R3 Range 3
WP A Weighing point A
Max Maximum load (weighing range)
Min Minimum weight
t, kg, g, lb These weight units are available.
3.4.3.2 Device display
The display of the device permits indication of 6-digit weight values (digit height 18 mm)
with decimal point.
Weight type/plus or minus sign Description
Gross weight
Gross weight in NTEP or NSC mode
Net weight (Net = gross - tare)
Tare weight
X3 Process Indicator PR 5410 3 Device description
Minebea Intec EN-20
To Next Page
Loading...