Minebea Intec X3 Process Indicator PR 5410 User Manual

Open the menu via - [Network parameter].
[HW address]
This parameter cannot be changed because the xed address is specied by the
instrument.
[Hostname]
NOTICE
Potential network problems
The host name must be unique in the network!
The user-dened device name is subject to the following restrictions:
- Minimum number of characters: 2, maximum number of characters: 24.
- The rst character must be a letter. Spaces are not permitted.
- 0–9, A-Z (not case-sensitive) are permitted.
- - or . may be included, but neither at the end nor in succession.
Input: via keypad
[DHCP]
If ☑ is checked (presettings: DHCP selected), the server automatically allocates the IP
address, subnet mask, and default gateway.
If ☐ is not checked, the settings [IP address], [Subnetmask] and [Default gateway] must
be dened in consultation with the responsible system administrator.
[VNC client]
This address can be used to allow access to the interface for remote access, see following
table.
User address Description
VNC client 0.0.0.0. Access via VNC not permitted.
VNC client 172.24.21.101 Access only from client machine with this address.
VNC client 172.24.21.255 Access from any client with address within range
172.24.21.1 - ..254.
VNC client 255.255.255.255 Access from client with any address.
X3 Process Indicator PR 5410 7 Commissioning
Minebea Intec EN-224

Minebea Intec X3 Process Indicator PR 5410 Specifications

General

Brand	Minebea Intec
Model	X3 Process Indicator PR 5410
Category	Touch Panel
Language	English