Minebea Intec X3 Process Indicator PR 5410 - Page 260

Note:
The selected SPM address must be unique within the system.
The SPM addresses for the input and outputs are unchanged after a restart.
1. Select [Conguration digital IOs] and conrm.
2. Select [Conguration digital inputs] and conrm.
The following window opens:
3. Select inputs 13. Use the keypad to enter and conrm a corresponding SPM address
%MXxxx (see Chapter 13.4).
X3 Process Indicator PR 5410 8 Production
Minebea Intec EN-258