Minebea Intec X3 Process Indicator PR 5410 - Page 266

Procedure:
1. Select [Dosing] and conrm.
The production window appears.
2. Select material ID [ID 2].
3. Press the [Start] softkey.
Press the [Stop] softkey to stop the process.
You can then press the [Restart] softkey to restart the process.
The material (product) is lled.
4. Once the set point is reached, the [Start] softkey can be pressed again.
5. Press 2× to exit the application.
X3 Process Indicator PR 5410 8 Production
Minebea Intec EN-264