Minebea Intec X3 Process Indicator PR 5410 - Page 62

Specications
Description Data
Connection 2× D-Sub female connector, 9-pin
Number of channels 2 (RS-232 and RS-422/485)
Transmission rate [Bit/s] 300, 600, 1200, 2400, 4800, <9600>, 19200 bit/sec
Cable type Twisted pair, screened (e.g. LifYCY 3×2×0.20), 1 pair of wi-
res for ground (GND).
Cable gauge
1.5 mm
2
<…> = preset values (factory settings)
X3 Process Indicator PR 5410 4 Device installation
Minebea Intec EN-60