Chapter 3: AT Commands Reference
December 31, 2007 AT Commands Reference Manual 3-303
The following table shows the +CRSM parameters.
Table 3-199: +CRSM Parameters
<Parameter> Description
<command> Integer type. Command passed on by the ME to the SIM.
176 Read BINARY
178 Read RECORD
192 Get RESPONSE
214 Update BINARY
220 Update RECORD
242 STATUS
<file_id> Integer type. This is the identifier of a elementary data file on SIM. Mandatory for
every <command> except of STATUS.
To Next Page
Loading...
