Muratec MFX-3595 - Clearing the Machine Parameters

3-4
3.2.2 Clearing the machine parameters
Resets the machine parameters to factory defaults.
1. From standby, press <Mode>, <*>, <0>, <0>.
2. Press [Clear Parameters].
3. Press [Yes]. The machine parameters will reset to factory defaults.
3.2.3 List
Adjustment Parameter
• Image data output level (Data attenuation) 001
• URADF,Scanning start position adjustment (Horizontal) /Back
• URADF, Elastic rate adjustment (Horizontal) /Back
• URADF, Scanning start position adjustment (Vertical) /Back
• URADF, Scanning end position adjustment (Vertical) /Back
• URADF,Scanningstartpositionadjustment(Horizontal)/Front
• URADF,Elasticrateadjustment(Horizontal)/Front
• URADF,Elasticrateadjustment(Vertical)/Front
• URADF, Scanning start position adjustment (Vertical) /Front
• URADF, Scanning end position adjustment (Vertical) /Front
030
031
033
034
035
036
037
038
039
• FBS,Scanning start position adjustment (Horizontal)
• FBS, Elastic rate adjustment (Horizontal)
• FBS, Elastic rate adjustment (Vertical)
• FBS, Scanning start position adjustment (Vertical)
040
041
042
043
• Duplexscanlengthadjustment 056
• Mirrorcarriagestandbypositionadjustment
• Backgroundleveladjustmentstartingposition
• Loop volume adjustment at DRS sensor
060
065
066
• Controlling paper curl 090
• Adjustmentfortimingtoshiftpaper(MFX-3595only) 093
• Paperloopvolumeadjustment 260
• Densityadjustment 301 ~ 357
Blank page detection for ...
• Contrast of characters, black and white scan, front page
• Size of characters, black and white scan, front page
• Contrast of characters, black and white scan, back page
• Size of characters, black and white scan, back page
• Contrast of characters, color scanning, front page
• Size of characters, color scanning, front page
• Contrast of characters, color scan, back page
• Size of characters, color scan, back page
480
481
482
483
484
485
486
487