Muratec MFX-3595 - Machine Settings

3-138
3.43.7 Modifying the session control time
ModifythesessiontimebetweenthemachineandtheOfceBridgeusershere.Thefactorydefaultis30
minutes.
WhenthereisnocommunicationbetweenthemachineandtheOfceBridgeuserduringthistime,theuser
willforciblybelogout.
Thetimecanbesetbetween10to1440minutes(24hours).
1. Openthenetworkservicescreen.(Seepage3-130.)
2. Click[SessionControltime].
3. Inputthedesiredvalueandclick[Save].
3.43.8 Machine settings
Asset Number
Thismodeisusedtoinputtheassetnumber.Youcanalsoinputtheassetnumberfromthemachinecontrol
panel.(Seepage3-123.)
1. Openthenetworkservicescreen.(Seepage3-130.)
2. Click[MachineSettings].
3. Inputtheassetnumberto“AssetNumber”boxandclick[Save].
 Theassetnumbershouldbewithin13characters.
Guest User Name
Thismodeisusedtoedittheguestusername“GUEST”.
1. Openthenetworkservicescreen.(Seepage3-130.)
2. Click[MachineSettings].
3. Inputthenewnameforguestusertothe“GuestUserName”boxandclick[Save].
 Theguestusernameshouldbewithin64characters.