3-19
3.3 Memory switch adjustment
3.3.1 Setting the memory switches
These switches are used to program internal machine parameters.
1. From standby, press <Mode>, <*>, <0>, <1>.
2. Press [Mem Switch Edit].
3. Call up the desired switch by pressing [Prev] or [Next], or by pressing the numeric keys.
4. Select the desired switch by pressing the box.
5. To navigate through the memory switch settings:
• Thebitsarerangedfrom7(left)to0(right).
• Press or of the cursor key to move the cursor.
• Press<0>or<1>onthenumerickeys,or[ ] or [ ] to change the bit value.
• Press[Enter]tosavethesettingofthedisplayedmemoryswitchandreturntothememoryswitch
edit screen.
• Press[Back]nottosavethesettingofthedisplayedmemoryswitch.
6. If you want to set other memory switches, repeat step 3-5. Otherwise, proceed to step 7.
7. Press <Reset> to return the machine to ready screen.
You can confirm the setting on a list. The switch list will be printed by pressing [Mem Switch Print] in
step 2.
To Next Page
Loading...
Need help?
General
