Muratec MFX-3595 User Manual

3-135
3.43.3 Firmware update via network
Toupdatethemachinevianetwork,settheitems.
1. Openthenetworkservicescreen.(Seepage3-130.)
2. Click[FirmwareUpdateviaNetwork].
3. Enterthenecessaryinformation.
4. Click[Update]tostartupdatingthemachine.
5. Whenupdatinghasnished,themachinerestartsautomatically.
 ChecktheROMversiontoseetheupdatehassucceeded.TheROMversionisdisplayedat“Machine
Status”ontheOfceBridge.
3.43.4 Firmware update
1. Openthenetworkservicescreen.(Seepage3-130.)
2. Click[FirmwareUpdate].
3. Click[Browse]tobrowsethelocationwherethermwareislocated.
“Control Panel” is only for MFX-3595.
eg.
Machine:3535a_USA_A0A0A0.bin,3595a_USA_A0A0A.bin
Controlpanel: 3595P_USA_A0A0A_update.bin
4. Click[Update].
5. Whenupdatingisnished,themachinerestartsfromitself.
6. ChecktheROMversiontoseetheupdatehassucceeded.TheROMversionisdisplayedat“Machine
Status”ontheOfceBridge.

Muratec MFX-3595 Specifications

General

Brand	Muratec
Model	MFX-3595
Category	All in One Printer
Language	English