To Next Page

To Previous Page

3-134

3.43.2 Convert dialling characters in e-mail gateway functions

Thefollowingdiallingcharacterswillbeconvertedtocertaincharactersspeciedhere:

 Pause(/P)

 Tone(/T)

 Flash(/F)

Forexample,whenyouenter“&A”for“/P”(pause)andspecifyafaxnumberlike“123/P456”,thenumberwill

beconvertedto“123&A456”andtransmittedate-mailgatewaytransmission.

1. Openthenetworkservicescreen.(Seepage3-130.)

2. Click[DialOptionConversion].

3. Enterthecharacterstowhichthemachineshouldconvertthediallingcharacter.

4. Click[Save].

NOTE

• TheFlashcharacter(/F)isnotavailableforUSA.

• Uptotwocharactersareabletoenterforeachdiallingcharacter.

• Foravailablecharacters,seetablebelow.

• Iftheboxisblank,thediallingcharacterswillbeoverwrittenwhentransmittingoverthee-mailgate-

way.

Muratec MFX-3595 User Manual

Questions and Answers: