3-130
3.43 Network service functions
The following topics will be covered in this section:
• E-maildetailsettings
• Dialoptionconversionsettings
• Firmwareupdatevianetwork
• Firmwareupdate
• Printdatacapture
• Networkcapture
• Modifyingthesessioncontroltime
• Machinesettings
• Remoteoperation
To open the network service screen
1. Startthewebbrowseroncomputer.
2. Typethemachine’sIPaddressintheURLaddresseldfollowedby“/service”.
e.g.http://192.168.1.10/service
3. EnterloginIDandpassword.
ID :muratec
Password :service
4. Nowthenetworkservicesettingsareavailable.