3-76
3.6 Clear programmed data / user Settings
User programmed information such as address book entries, date, time, Transmit Terminal Identifier (TTI),
Subscriber ID, etc., are stored in the unit’s SD card.
This function does not clear the machine parameters, memory switches and unique switches.
1. Press <Mode>, <*>, <0>, <2>.
2. Press [Yes].
3.7 All RAM clear
The All RAM clear setting will erase all user-programmed information, all documents in memory, and reset
the memory switches and unique switches to factory defaults.
This feature may also be used to try and clear a machine malfunction or lock up. If possible, when the All
RAM clear is used to reset a malfunction or lock up, it is advisable to print the machine settings, address
book entries to help in reprogramming this information.
1. Press <Mode>, <*>, <0>, <3>.
2. Press [Yes].
3. The machine reboots automatically.
The clear modes initialize the following data :
All RAM clear User data clear
Machine parameter
Memory switch
Unique switch
Consumable order sheet
Life monitor
Journal
Stored images
: Cleared
Blank : Not cleared
To Next Page
Loading...
Need help?
General
