Muratec MFX-3595 User Manual

Specifications
page 2 of 66
Sydney MLK TypeS-Mid Sydney MLK TypeS-High
Item
Warm up time
approx. 29 sec.(WUT3)
*The method for measurement refers
"WUP FCOT Measurement Method"
seat.
approx. 11 sec.(WUT1： PowerON -
"Copy Ready" panel display）
approx. 2４ sec.（WUT2：PowerON -
Printer motor pre-move complete）
approx. 29 sec.(WUT3)
*The method for measurement refers
"WUP FCOT Measurement Method"
seat.
approx. 11 sec.(WUT1： PowerON -
"Copy Ready" panel display）
approx. 2４ sec.（WUT2：PowerON -
Printer motor pre-move complete）
First copy out time (FCOT)
approx. 5sec
*The method for measurement refers
"WUP FCOT Measurement Method"
t
approx. 5sec
*The method for measurement refers
"WUP FCOT Measurement Method"
t
# of copies 1-99 1-99
Enlargement/Reduction yes/yes:(FBS/URADF) yes/yes:(FBS/URADF)
>Setting range
FBS: 25 - 400% (1% step)
URADF:25 - 100% (1% step)
FBS: 25 - 400% (1% step)
URADF:25 - 100% (1% step)
>Preset (A4 Setting)
>Preset (LTR Setting)
A4: 70%, 81%, 86%, 100%, 115%,
122%, 141%
LTR: 50% ,64%, 78%, 100%, 121%,
129%, 154%
A4: 70%, 81%, 86%, 100%, 115%,
122%, 141%
LTR: 50% ,64%, 78%, 100%, 121%,
129%, 154%
Recording paper capacity (Std.)
500sheets(Cassette) + 100sheets
(Bypass Tray)
500sheets(Cassette)
×2
+ 100sheets
(Bypass Tray)
(Max.)
500sheets x 4(Cassette) + 100sheets
(Bypass Tray)
500sheets x 4(Cassette) + 100sheets
(Bypass Tray)
Fax Specifications
Type
Tx & Rx Tx & Rx
Compatibility G3 & Super G3 G3 & Super G3
Resolution (Scanning/Tx/Rx) (horizontal x vertical) (horizontal x vertical)
>Super Fine
16 dots/mm×15.4 lines/mm (initial
16 dots/mm×15.4 lines/mm (initial
(406 dpi × 392 lpi) (406 dpi × 392 lpi)
not supported 600dpi × 600lpi not supported 600dpi × 600lpi
>Fine 8 dots/mm×7.7 lines/mm 8 dots/mm×7.7 lines/mm
(203 dpi × 196 lpi) (203 dpi × 196 lpi)
>Normal 8 dots/mm×3.85 lines/mm 8 dots/mm×3.85 lines/mm
(203 dpi × 98 lpi) (203 dpi × 98 lpi)
>Grayscale 8 dots/mm×7.7 lines/mm 8 dots/mm×7.7 lines/mm
(203 dpi × 196 lpi) (203 dpi × 196 lpi)
Telephone network PSTN PSTN
Transmission speed 2sec. level (Super G3) 2sec. level (Super G3)
6sec. (G3) 6sec. (G3)
Coding method MH, MR, MMR, JBIG MH, MR, MMR, JBIG
Modem
>G3: 14400,12000,9600,7200,4800,2400bps 14400,12000,9600,7200,4800,2400bps
Control signal speed: 300bps Control signal speed: 300bps
>SuperG3: 33600,31200,28800,26400,24000, 33600,31200,28800,26400,24000,
21600,19200,16800,14400,12000, 21600,19200,16800,14400,12000,
9600,7200,4800,2400bps 9600,7200,4800,2400bps
Control signal speed: 2400,1200bps Control signal speed: 2400,1200bps
Other Information
>fingerprint authentication
N/A N/A
>RFID
Yes
RFIDeas； Keyboad type for PaperCut
Equitrac terminal【TBD:Sydneyでの動作確
認要】
Yes
RFIDeas； Keyboad type for PaperCut
Equitrac terminal【TBD:Sydneyでの動作確
認要】
Image data memory capacity (Std.)
512MB(Total Memory
）
Image data memory 16MB(Fax),
50MB(Copy)
512MB(Total Memory
）
Image data memory 16MB(Fax),
50MB(Copy)
(Max.) N/A N/A

Muratec MFX-3595 Specifications

General

Brand	Muratec
Model	MFX-3595
Category	All in One Printer
Language	English