Printing in the Windows Environment 2-2
2.1 Preparation for Printing (Network Connection)
2
2 Printing in the Windows Environment
2.1 Preparation for Printing (Network Connection)
2.1.1 Overview
Before using this machine as a printer, you need to install the printer driver on your computer.
This section describes preparatory steps for printing from this machine using the installer that comes with
this machine.
2.1.2 Before Installing the Printer Driver (For Administrators)
Preparation flow
In order to use this machine via network connection, you need to take preparatory steps on this machine be-
fore installing the printer driver.
1 Connecting this machine to the network
% Checking the LAN cable connection
% Checking the network settings
Check that this machine has had an IP address assigned to it.
2 Configuring the network printing environment
% When using the Normal printing (at port 9100)
Make sure that the RAW port number has been set. (In normal circumstances, you can use the default
settings.) Use Normal Printing (Port 9100) unless otherwise specified by the administrator.
% When using the Internet Print (IPP)
Check the IPP operating environment. (In normal circumstances, you can use the default settings.)
% When using the Secure Print (IPPS)
Configure the IPPS operating environment. Communication between this machine and the computer is
encrypted with SSL.
3 Preparation finished.
To Next Page
Loading...
Need help?
General
