Printing in a Mac OS Environment 3-7
3.1 Preparation for Printing (Bonjour Connection)
3
Configuring connection using Rendezvous (Mac OS X 10.2/10.3)
Add the printer automatically detected by Rendezvous to the PC.
1 From [Macintosh HD] - [Applications] - [Utilities], double-click [Printer Setup Utility] or [Print Center] to
open it.
2 When the [You have no printers available.] window appears, click [Add]. When the [Printer List] appears,
click [Add].
% If available printers have already been specified, the [You have no printers available.] window does
not appear.
3 Select [Rendezvous] as the connection method.
Connected printers are detected.
% If no printers are detected, restart this machine.
4 From the [Name] list, select the desired printer for Rendezvous connection.
% To check the printer name, select [Utility] - [Administrator Settings] - [Network Settings] - [Bonjour
Setting] on this machine.
5 Manually select the printer driver.
% In [Printer Model:], select [GENERIC], then click the driver of the desired printer from the model list.
6 Click [Add].
This completes the addition process of the printer. Then, proceed to the [Installable Options] window
to configure the optional environment for this machine. For details, refer to page 3-7.
3.1.4 Configuring the Default Settings of the Printer Driver
Configuring the optional environment of this machine
When you use this machine for the first time, properly configure the printer driver so that it contains informa-
tion such as the options installed in this machine.
To Next Page
Loading...
Need help?
General
