Muratec MFX-C2280 - Printing on Custom Size Paper ([Original Size])

Printing in the Windows Environment 2-23
2.4 Useful Printing Functions
2
Printing on custom size paper ([Original Size])
A special sized original is printed on custom sized paper loaded in the Bypass Tray.
1 In [Original Size] in the [Basic] tab, select [Custom Size].
% In [Paper Size], select [Same as Original Size].
The [Custom Size] setting window appears.
2 Specify the width and length as desired, and click [OK].
d Reference
Load the custom sized paper in the Bypass Tray. For details on how to add paper to the Bypass Tray, refer
to "User's Guide [Introduction]/[Loading Paper]".
When you are using the PCL driver, you can register a custom size in the [Settings] tab. For details in the
[Settings] tab, refer to page 2-104.