Printing in a Mac OS Environment 3-5
3.1 Preparation for Printing (Bonjour Connection)
3
Installing the printer driver
Install the printer driver using the installer.
0 Before installation, exit all application software programs that are running.
1 Mount the "Driver CD-ROM Vol. 2" disk into the CD-ROM drive of the computer.
2 Open the folder on the CD-ROM that contains the desired printer driver.
% Select the folder according to the printer driver, operating system, and language to be used.
3 Copy the driver file onto the desktop according to the Mac OS X version and the series name of this
machine.
% Mac OS X 10.2: GENERIC_36C-6_102.pkg
% Mac OS X 10.3: GENERIC_36C-6_103104.pkg
% Mac OS X 10.4: GENERIC_36C-6_103104.pkg
% Mac OS X 10.5: GENERIC_36C-6_105.pkg
% Mac OS X 10.6: GENERIC_36C-6_106.pkg
% Mac OS X 10.7: GENERIC_36C-6_106.pkg
% In Mac OS X 10.5/10.6/10.7, the driver folder varies depending on the required paper size.
Select it according to your environment.
To mainly use the metric-based paper size such as A4 size: "WW_A4" folder
To mainly use the inch-based paper size such as letter size or 8 1/2 e 11: "WW_Letter" folder
4 Double-click the file copied onto the desktop.
The printer driver installer starts.
5 Click [Continue] following the instructions on the pages that follow until the [Install] page appears.
% When the name and password prompt appears during the procedure, enter the administrator name
and password.
6 Click [Install].
The printer driver is installed in the computer.
7 Click [Close].
This completes the installation process of the printer driver. Then, add the printer to the computer.
To Next Page
Loading...
