Muratec MFX-C2280 - Binding in the Center of the Paper ([Fold & Staple:]); Folding Papers ([Fold & Staple:])

Printing in a Mac OS Environment 3-21
3.3 Useful Printing Functions
3
Binding in the center of the paper ([Fold & Staple:])
The printed sheets are bound in the center and folded before they are output.
In [Fold & Staple:] in [Layout / Finish], select [Center Staple and Fold].
As the sheets are bound in the center, use the combined document data or set the [Print Type:] to [Booklet]
on the [Layout / Finish] tab.
Tips
- To use the Center Staple & Fold function:
–The Finisher C2280FN2 and Saddle Stitcher C2280SD are required.
Folding papers ([Fold & Staple:])
The printed sheets are creased before they are output.
Half-Fold
Tri-Fold
In [Fold & Staple:] in [Layout / Finish], select the folding mode.