Description of Setup Buttons (User Settings) 6-7
6
[PS Setting]
To display: [Utility] - [User Settings] - [Printer Settings] - [PS Setting]
Specify the default values for PS printing.
This machine operates according to these settings unless the printer driver specifies the print settings.
[Security Settings]
To display: [Utility] - [User Settings] - [Printer Settings] - [Security Settings]
Select whether to verify the digital signature when printing XPS/OOXML (docx, xlsx, pptx) files with a digital
signature.
[Font Size] Specify the default font size value.
• [Scalable Font]: Enter the font size (in points) for scalable fonts (where
different letters have different widths).
[12.00 point] is specified by default.
• [Bitmap Font]: Enter the font width (in pitches) for bitmap fonts (where
all letters have the same width).
[10.00 pitch] is specified by default.
[Line/Page] Enter the number of lines of text data to be printed on one page.
The default values vary depending on the country you are in.
[CR/LF Mapping] Select whether to replace the line feed codes when printing text data.
When you want to replace the line feed codes, select the replacement
method.
[No] is specified by default.
Settings Description
Settings Description
[Print PS Errors] Select whether to print error information when an error occurs during PS
rasterization.
[OFF] is specified by default.
[ICC Profile Settings] Specify the default profile setting to be displayed in the printer driver.
[Auto Trapping] Select whether to superimpose neighboring colors to print so as to prevent
white space being generated around a picture.
Selecting [ON] prevents the generation of white lines at the boundaries of
colors in graphs or figures.
[OFF] is specified by default.
[Black Overprint] Select whether to print so as to prevent white space being generated
around a black character or figure.
• [Text/Figure]: Adjacent portion between a text and figure is overprinted
with black. Use this setting when a white line appears around the black
portion in a graph or figure.
• [Text]: Black is overprinted on the adjacent colors in the text portion.
Use this setting when a white line appears around the text.
• [OFF]: The data is printed as is without overprinting with black.
[OFF] is specified by default.
Settings Description
[Verify XPS/OOXML Digital
Signature]
Select whether to verify the digital signature when printing XPS/OOXML
(docx, xlsx, pptx) files with a digital signature or not.
When [ON] is selected, the data is not printed if the signature is invalid.
[OFF] is specified by default.
To Next Page
Loading...
