Printing without Using the Printer Driver 5-4
5.2 Directly Printing from a USB Memory Device
5
5.2 Directly Printing from a USB Memory Device
Printing from a USB memory device
By connecting a USB memory device to this machine and specifying a file stored in the USB memory device,
you can print the file.
Supported USB memory devices
USB memory devices that have the following specifications can be connected to this machine.
Note the following points when connecting a USB memory device to this machine.
- Use the USB connector on the side that is near the Control Panel. Do not use the USB connector near
the rear side because it is used for optional devices.
- Do not disconnect the USB memory device while saving a file to the device or printing a file saved in
the device.
- Use only a USB memory device on this machine. Do not use other USB devices (such as hard disk unit
and USB switching hub).
- Do not connect or disconnect the USB memory when the hourglass is being displayed in the Control
Panel while this machine is active.
- Do not disconnect the USB memory just after connecting it.
Printing procedure
Connect the USB memory device to this machine, and on the Touch Panel, specify the file you want to print.
For details on the printing procedure, refer to "User's Guide [Box Operations]/[Use a USB Memory Device
(External Memory)]".
Item Requirement
Interface Compatible with USB Version 1.0/2.0 interface
Format type Formatted in FAT32
Security Encryption, password lock, or other security functions are not provided or
such functions can be turned off.
Memory size Up to 2 GB is recommended.
• Devices with a memory size of 4 GB or greater may not operate cor-
rectly.
• A USB memory device, which is recognized as multiple drives, cannot
be used.
To Next Page
Loading...
Need help?
General
