Printing in the Windows Environment 2-63
2.4 Useful Printing Functions
2
Inserting paper between transparencies ([Transparency Interleave])
When printing on multiple OHP transparencies, you can insert the specified paper between the OHP trans-
parencies. These sheets of paper prevent the OHP transparencies from sticking together due to heat gener-
ated during printing or static electricity.
1 In [Paper Type] in the [Basic] tab, select [Transparency].
% If you select [Transparency], the [Print Type] is set to [1-Sided], and the [Select Color] is set to [Gray
Scale].
2 In the [Cover Mode] tab, select the [Transparency Interleave] check box.
% In [Interleave Tray], select the paper tray for the paper to be inserted between OHP transparencies.
% OHP interleaves are inserted as blank sheets.
To Next Page
Loading...
