ANNOUNCEMENT SERVICE
– 24 –
A2018-10
To provide a voice message when an incoming C.O. line/Tie line call has been transferred and
encounters a busy or no answer condition:
DESCRIPTION DATA
Assign a Digital Announcement Trunk card
number to the required LEN.
NOTE: The Digital Announcement Trunk
card number must be assigned
to the first LEN (Level 0), the
third LEN (Level 2), the fifth LEN
(Level 4) and the seventh LEN
(Level 6) of each LT slot.
(1)
(2)
000-763: LEN
EB002-EB127: Digital Announcement
Trunk Card No.
For PIM0/1: EB002-EB031
For PIM2/3: EB032-EB063
For PIM4/5: EB064-EB095
For PIM6/7: EB096-EB127
NOTE: EB000 and EB001 are dedi-
cated to built-in Digital An-
nouncement Trunk of the MP
card.
Assign the Service Restriction Class A for
Digital Announcement Trunk Access
(Record/Replay/Delete).
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction Class
A
Allow Digital Announcement Trunk Access
in the Service Restriction Class A as-
signed by CM12 Y=02.
•
(1)
(2)
Y=33
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign the feature for a voice message
connection to a transferred trunk when the
transferred destination does not answer or
the transferred destination is busy to the
required tenant.
•
(1)
(2)
Y=50 No Answer
00-63: Tenant No.
0: Connection of the transferred trunk
line message
•
(1)
(2)
Y=51 Busy
00-63: Tenant No.
0: Connection of the transferred trunk
line message
CM12
CM15
CM65
START
CM10
A
To Next Page
Loading...
