STATION MESSAGE DETAIL RECORDING (SMDR)
PROGRAMMING
SMDR with AP00 Programming
– 492 –
A2486-10
DESCRIPTION DATA
On the AP00 card, set SW1 switch as
shown below.
SW1-4 should be set as follows;
ON : The AP No. is 04-15
OFF: The AP No. is 20-31
Clear the billing memory.
NOTE: Before executing CMD102, be
sure to save/print out all of the
stored call records.
CMD102 deletes all of the stored
records.
(1)
(2)
0000
CCC
On the AP00 card, set the SW1 switch as
shown below:
SW1-4 should be set as follows;
ON : The AP No. is 04-15
OFF: The AP No. is 20-31
The buffering method when the number of
the stored SMDR information has reached
to the predetermined value.
(1)
(2)
41
0 : No new data is stored
1 : New data is stored by deleting the
oldest data
CMD102
E
F
SW1
ON
: POSITION TO BE SET
4
3
2
1
AP OFF LINE
SW1
ON
: POSITION TO BE SET
4
3
2
1
CMD000
To Next Page
Loading...
