NEC NEAX 2000 - Page 619

FEATURES FOR OTHER COUNTRIES ONLY
CALLER ID CLASS
– 599 –
A2594-10
DESCRIPTION DATA
Specify the ringing tone for each calling
number, if required.
•
(1)
(2)
Y=04 Ringing tone assignment
0-1499: Development Table No.
0 : Depends on CM35 Y=33
1 : Not used
2 : Internal ringing tone
3 : External ringing tone
Specify which is displayed on the LCD,
when receiving both the calling number
and the name from network on incoming
call.
•
(1)
(2)
Y=05
Calling Number/Calling Name Display
0-1499: Development Table No.
0 : Calling Number Display
1 : Calling Name Display
Specify whether the Call Waiting is set for
each calling number or not.
•
(1)
(2)
Y=06 Call Waiting
0-1499: Development Table No.
0 : Not available
1 : Available
NOTE: This data is effective when
the 2nd data of CM35 Y=59 is
1.
Specify whether the UCD Priority Queuing
is set for each calling number or not.
•
(1)
(2)
Y=07 UCD Priority Queuing
0-1499: Development Table No.
0 : Not Priority
1 : Priority
Specify the priority for calling name dis-
play.
•
(1)
(2)
Y=12 Priority for name display
0-1499: Development Table No.
0 : Name received from the network
is displayed.
1 : Name assigned by CMDB Y=00 is
displayed.
Specify the type of Single Data Message
Frame Format.
•
(1)
(2)
Y=30
1: Single Data Message Frame Format
0 : with time parameter
1 : without time parameter
END
CMDB
A