NEC NEAX 2000 - Page 620

FEATURES FOR OTHER COUNTRIES ONLY
CALLER ID CLASS
– 600 –
A2594-10
(5) Other Relational Data Assignment
DESCRIPTION DATA
Assign the trunk access code for outgoing
call sent to the SMDR.
For using Save & Repeat feature, this
trunk access code will save and sent with
the calling number.
•
(1)
(2)
Y=44
Trunk access code for Save & Repeat
00-63: Trunk Route No.
0-9/00-99: Trunk Access Code
Specify whether the calling number is sent
to OAI terminal or not.
(1)
(2)
462: Send to OAI terminal
0 : To send
1 : Not sent
Specify whether the calling number is sent
to the SMDR terminal or not.
(1)
(2)
463: Send to SMDR terminal
0 : To send
1 : Not sent
Specify whether the Caller ID is sent to the
SMDR terminal or not.
NOTE: This is required when using
AP00 card for SMDR.
(1)
(2)
143: Send to SMDR terminal
0 : Not sent
1 : To send
Provide the D
term
with a Display Change
key for calling number/calling name dis-
play changing.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F1099: Calling No./Calling Name Dis-
play
Provide the ATTCON/DESKCON with a
Display Change key for calling number/
calling name display changing.
•
(1)
(2)
Y=00
ATTCON No. (E000-E007) + + Key
No.
F6122: Calling No./Calling Name Dis-
play
CMD000
CM90
START
END
CM35
CM08
,
,