NETGEAR 7300 Series

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
IS CLI Mapping A-3
202-10009-01_060204
QOS config acl rule match srcl4port
range <aclid> <rulenum>
<startport> <endport>
QOS config acl interface add <slot/port>
<direction> <aclid>
Interface
Config
ip access-group <1-199> {in | out}
QOS config acl interface remove <slot/
port> <direction> <aclid>
Interface
Config
no ip access-group <1-199> {in | out}
QOS config acl rule match dstl4port
number <aclid> <rulenum>
<portnumber>
Interface
Config
ip access-group <1-199> {in | out}
QOS config acl rule match srcl4port
number <aclid> <rulenum>
<portnumber>
Interface
Config
QOS config diffserv adminmode
<enable/disable>
Global
Config
diffserv
Global
Config
no diffserv
QOS show diffserv info Privileged
EXEC
show diffserv
QOS show diffserv service info detailed
<slot/port> <in/out>
Privileged
EXEC
show diffserv service <slot/port> {in |
out}
QOS show diffserv service info summary
[in/out]
Privileged
EXEC
show diffserv service brief [in | out]
QOS show diffserv policy detailed
<policyname>
Privileged
EXEC
show policy-map <policymapname>
QOS show diffserv policy summary Privileged
EXEC
show policy-map
QOS show diffserv service stats detailed
<slot/port> [in/out]
Privileged
EXEC
show policy-map interface <slot/port>
{in | out}
QOS config diffserv policy create
<policyname> <in/out>
Global
Config
policy-map <policyname> {in | out}
Table 13-2. IS CLI Mapping (continued)
Package 7300 Series L3 Switch Command
CLI Command
Mode Syntax