User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
A-4 IS CLI Mapping
202-10009-01_060204
QOS config diffserv policy delete
<policyname>
Global
Config
no policy-map <policyname>
QOS config diffserv policy rename
<policyname> <newpolicyname>
Global
Config
policy-map rename <policyname>
<newpolicyname>
QOS config diffservpolicy class add
<policyname> <classname>
Policy-Ma
p Config
class <classname>
QOS config diffserv policy class remove
<policyname> <classname>
Policy-Ma
p Config
no class <classname>
QOS config diffserv policy bandwidth
kbps <policyname> <classname>
<1-4294967295>
Policy-Cla
ss-Map
Config
bandwidth {kbps <1-4294967295> |
percent <1-100>}
QOS config diffserv policy bandwidth
percent <policyname>
<classname> <1-100>
Policy-Cla
ss-Map
Config
QOS config diffserv policy expedite kbps
<policyname> <classname>
<1-4294967295> [1-128]
Policy-Cla
ss-Map
Config
expedite kbps <1-4294967295>
[1-128]
QOS config diffserv policy expedite
percent <policyname>
<classname> <1-100> [1-128]
Policy-Cla
ss-Map
Config
expedite percent <1-100> [1-128]
QOS config diffserv policy shape
average <policyname>
<classname> <1-4294967295>
Policy-Cla
ss-Map
Config
shape {bps-average
<1-4294967295> | bps-peak
<1-4294967295> <1-4294967295>}
QOS config diffserv policy shape peak
<policyname> <classname>
<1-4294967295> <1-4294967295>
Policy-Cla
ss-Map
Config
QOS config diffserv policy randomdrop
<policyname> <classname>
<1-250000> <1-500000> <0-100>
[<0-1000000> [0-16>]]
Policy-Cla
ss-Map
Config
randomdrop <1-250000>
<1-500000> <1-100> [<1-1000000>
[<0-16>]]
QOS config diffserv policy mark cos
<policyname> <classname> <0-7>
Policy-Cla
ss-Map
Config
mark {cos <0-7> | ip-dscp <0-63> |
ip-precedence <0-7>}
Table 13-2. IS CLI Mapping (continued)
Package 7300 Series L3 Switch Command
CLI Command
Mode Syntax
To Next Page
Loading...
Need help?
General
