NETGEAR 7300 Series User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
A-22 IS CLI Mapping
202-10009-01_060204
Global
Config
no bootpdhcprelay disable
Routing config router bootpdhcprelay
maxhopcount <1-16>
Global
Config
bootpdhcprelay maxhopcount <1-16>
Global
Config
no bootpdhcprelay maxhopcount
Routing config router bootpdhcprelay
minwaittime <0-100>
Global
Config
bootpdhcprelay minwaittime <0-100>
Global
Config
no bootpdhcprelay minwaittime
Routing config router bootpdhcprelay
serverip <ipaddr>
Global
Config
bootpdhcprelay serverip <ipaddr>
Routing config router ecmpmode <enable/
disable>
Global
Config
ip ecmpmode
Global
Config
no ip ecmpmode
Routing config router ospf
1583compatibility <enable/disable>
Router
OSPF
Config
1583compatibility
Router
OSPF
Config
no 1583compatibility
Routing config router ospf area
authentication <areaid> <none/
simple/encrypt>
Router
OSPF
Config
area <areaid> authentication {encrypt
| none | simple}
Routing config router rip autosummary
<enable/disable>
Router
RIP
Config
auto-summary
Router
RIP
Config
no auto-summary
Table 13-2. IS CLI Mapping (continued)
Package 7300 Series L3 Switch Command
CLI Command
Mode Syntax

NETGEAR 7300 Series Specifications

General

Model	NETGEAR 7300 Series
Form Factor	Rack-mountable
VLAN Support	Yes
Jumbo Frame Support	9KB
Management	Web-based, CLI
Layer	Layer 2/3