NETGEAR 7300 Series - Page 325

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
IS CLI Mapping A-37
202-10009-01_060204
Switching config lag deleteport <logical slot/
port> <slot/port | all>
Interface
Config
deleteport <logical slot/port>
Global
Config
deleteport <logical slot/port> all
Switching config lag adminmode <logical slot/
port | all> <enable | disable>
Global
Config
port-channel adminmode {<logical
slot/port> | all}
Global
Config
no port-channel adminmode {<logical
slot/port> | all}
Switching config lag linktrap <logical slot/port
| all> <enable | disable>
Global
Config
port-channel linktrap {<logical slot/
port> | all}
Global
Config
no port-channel linktrap {<logical slot/
port> | all}
Switching config lag name <logical slot/port |
all> <name>
Global
Config
port-channel name {<logical slot/
port> | all} <name>
Switching config lag deletelag <logical slot/
port | all>
Interface
Config
delete interface {<logical slot/port> |
all}
Switching config lag stpmode <logical slot/
port | all> <off | 802.1d | fast>
Interface
Config
spannig-tree {<logical slot/port> | all}
{off | 802.1d | fast}
Switching config vlan create <2-4094> VLAN
database
vlan <1-4094>
VLAN
database
no vlan <1-4094>
Switching config vlan name <name>
<2-4094>
VLAN
database
vlan name <1-4094> <newname>
Switching config vlan delete <2-4094> VLAN
database
no vlan name <1-4094>
Switching config vlan makestatic <2-4094> VLAN
database
vlan makestatic <1-4094>
Switching config vlan participation <exclude |
include | auto> <1-4094> <slot/port
| all>
Interface
Config
vlan participation {exclude | include |
auto} <1-4094>
Table 13-2. IS CLI Mapping (continued)
Package 7300 Series L3 Switch Command
CLI Command
Mode Syntax