NETGEAR 7300 Series - Page 324

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
A-36 IS CLI Mapping
202-10009-01_060204
Interface
Config
no snmp trap link- status
Global
Config
snmp trap link- status all
Global
Config
no snmp trap link- status all
Switching config port physicalmode <slot/port
| all> <100h | 100f | 10h | 10f>
Interface
Config
speed {{100 | 10} {half-duplex |
full-duplex} | 1000 full-duplex}
Global
Config
speed all {{100 | 10} {half-duplex |
full-duplex} | 1000 full-duplex}
Switching config port lacpmode <slot/port/all>
<enable/disable>
Interface
Config
port lacpmode
Interface
Config
no port lacpmode
Global
Config
port lacpmode all
Global
Config
no port lacpmode all
Switching config port autoneg <slot/port/all>
<enable/disable>
Interface
Config
auto-negotiate
Interface
Config
no auto-negotiate
Global
Config
auto-negotiate all
Global
Config
no auto-negotiate all
Switching config lag create <name> Global
Config
port-channel <name>
Switching config lag addport <logical slot/
port> <slot/port>
Interface
Config
addport <logical slot/port>
Table 13-2. IS CLI Mapping (continued)
Package 7300 Series L3 Switch Command
CLI Command
Mode Syntax