LAN Configuration
107
ProSecure Unified Threat Management (UTM) Appliance
Figure 57.
The Known PCs and Devices table lists the entries in the network database. For each PC or
device, the following fields display:
• Check box. Allows you to select the PC or device in the table.
• Name. The name of the PC or device. For computers that do not support the NetBIOS
protocol, the name is displayed as Unknown (you can edit the entry manually to add a
meaningful name). If the PC or device was assigned an IP address by the DHCP server,
then the name is appended by an asterisk.
• IP Address. The current IP address of the PC or device. For DHCP clients of the UTM,
this IP address does not change. If a PC or device is assigned a static IP address, you
need to update this entry manually after the IP address on the PC or device has changed.
• MAC Address. The MAC address of the PC or device’s network interface.
• Group. Each PC or device can be assigned to a single LAN group. By default, a PC or
device is assigned to Group 1. You can select a different LAN group from the Group
drop-down list in the Add Known PCs and Devices section or on the Edit Groups and
Hosts screen.
• Profile Name. The VLAN to which the PC or device is assigned.
• Action. The Edit table button, which provides access to the Edit Groups and Hosts
screen.
To Next Page
Loading...
Need help?
General