EasyManuals Logo
Home>NETGEAR>Firewall>UTM5

NETGEAR UTM5 User Manual

NETGEAR UTM5
645 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Introduction
16
ProSecure Unified Threat Management (UTM) Appliance
Multiple WAN Port Models for Increased Reliability or
Outbound Load Balancing
The UTM product line offers models with two broadband WAN ports. The second WAN port
allows you to connect a second broadband Internet line that can be configured on a mutually
exclusive basis to:
• Provide backup and rollover if one line is inoperable, ensuring that you are never
disconnected.
• Load balance, or use both Internet lines simultaneously for outgoing traffic. A UTM with
dual WAN ports balances users between the two lines for maximum bandwidth efficiency.
See Appendix C, Network Planning for Dual WAN Ports (Multiple WAN Port Models Only) for
the planning factors to consider when implementing the following capabilities with dual WAN
port gateways:
• Single or multiple exposed hosts
• Virtual private networks
Wireless Features
Wireless client connections are supported on the UTM9S with a UTM9SWLSN wireless
module installed. The UTM9S supports the following wireless features:
• 2.4-GHz radio and 5-GHz radio. Either 2.4-GHz band support with 802.11b/g/n/ wireless
modes or 5-GHz band support with 802.11a/n wireless modes.
• WMM QoS priority. Wi-Fi Multimedia (WMM) Quality of Service (QoS) priority settings to
map one of four queues to each Differentiated Services Code Point (DSCP) value.
• Wireless Distribution System (WDS). WDS enables expansion of a wireless network
through two or more access points that are interconnected.
• Access control. The Media Access Control (MAC) address filtering feature can ensure
that only trusted wireless stations can use the UTM to gain access to your LAN.
• Hidden mode. The SSID is not broadcast, assuring that only clients configured with the
correct SSID can connect.
• Secure and economical operation. Adjustable power output allows more secure or
economical operation.
DSL Features
DSL is supported on the UTM9S with a UTM9SDSL xDSL module installed. The UTM9S
automatically detects the following types of DSL connections:
• ADSL, ADSL2, and ADLS2+
• VDSL and VDSL2
Annex A, Annex B, and Annex M are supported to accommodate PPPoE, PPPoA, and IPoA
ISP connections.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR UTM5 and is the answer not in the manual?

NETGEAR UTM5 Specifications

General IconGeneral
BrandNETGEAR
ModelUTM5
CategoryFirewall
LanguageEnglish

Related product manuals