Network and System Management
431
ProSecure Unified Threat Management (UTM) Appliance
on the Log Query screen and view onscreen (see Query the Quarantine Logs on page 485)
are stored on the ReadyNAS. However, after you have integrated a ReadyNAS with the
UTM, logs can no longer be sent to an email address (see the Email Logs to Administrator
section on the Email and Syslog screen). If you have enabled a syslog server on the Email
and Syslog screen, logs are still send to the syslog server.
When you integrate a ReadyNAS with the UTM, the logs that were
saved on the UTM are deleted.
Note: If the network connection to the ReadyNAS goes down, the
quarantine logs are no longer saved, and all other logs are saved on
the UTM. In this situation, the ReadyNAS and quarantine status
fields show OFF on the System Status screen (see View the System
Status Screen on page 459). When the network connection comes
back up, the quarantine logs and all other logs are saved on the
ReadyNAS once again, but the logs that were saved on the UTM are
deleted.
Connect to a ReadyNAS
 To connect to the ReadyNAS on the UTM:
1. Select Administration > ReadyNAS Integration. The ReadyNAS Integration screen
displays:
Figure 258.
2. To connect to the ReadyNAS, select the Yes radio button.
To Next Page
Loading...
Need help?
General