NETGEAR UTM5 User Manual

System Logs and Error Messages
613
ProSecure Unified Threat Management (UTM) Appliance
WAN-to-LAN Logs
This section describes logs that are generated when the UTM processes WAN-to-LAN traffic.
DMZ-to-LAN Logs
This section describes logs that are generated when the UTM processes DMZ-to-LAN traffic.
WAN-to-DMZ Logs
This section describes logs that are generated when the UTM processes WAN-to-DMZ
traffic.
Table 183. Routing logs: WAN to LAN
Message Nov 29 10:05:15 [UTM] [kernel] WAN2LAN[ACCEPT] IN=WAN OUT=LAN SRC=
192.168.1.214 DST=192.168.10.10 PROTO=ICMP TYPE=8 CODE=0
Explanation • This packet from the LAN to the WAN has been allowed by the firewall.
• For other settings, see Table 154 on page 597.
Recommended Action None.
Table 184. Routing logs: DMZ to WAN
Message Nov 29 09:44:06 [UTM] [kernel] DMZ2LAN[DROP] IN=DMZ OUT=LAN SRC=
192.168.20.10 DST=192.168.10.10 PROTO=ICMP TYPE=8 CODE=0
Explanation • This packet from the DMZ to the LAN has been dropped by the firewall.
• For other settings, see Table 154 on page 597.
Recommended Action None.
Table 185. Routing logs: WAN to DMZ
Message Nov 29 09:19:43 [UTM] [kernel] WAN2DMZ[ACCEPT] IN=WAN OUT=DMZ SRC=
192.168.1.214 DST=192.168.20.10 PROTO=ICMP TYPE=8 CODE=0
Explanation • This packet from the WAN to the DMZ has been allowed by the firewall.
• For other settings, see Table 154 on page 597.
Recommended Action None.

NETGEAR UTM5 Specifications

General

Brand	NETGEAR
Model	UTM5
Category	Firewall
Language	English