Monitoring System Access and Performance
439
ProSecure Unified Threat Management (UTM) Appliance
Figure 262.
6. Enter the settings as explained in the following table:
7. Click Test to ensure that the connection to the server and email address succeeds.
8. Click Apply to save your settings.
Configure and Activate System, Email, and Syslog Logs
You can configure the UTM to log system events such as a change of time by an NTP server,
secure login attempts, reboots, and other events. You can also send logs to the administrator
Table 109. Email Notification screen settings
Setting Description
Show as Mail Sender A descriptive name of the sender for email identification purposes.
For example, enter UTMnotification@netgear.com.
SMTP Server The IP address and port number or Internet name and port number of
your ISP’s outgoing email SMTP server. The default port number
is 25.
Note: If you leave this field blank, the UTM cannot send email
notifications.
This server requires authentication If the SMTP server requires authentication, select the This server
requires authentication check box, and enter the user name and
password.
User Name The user name for SMTP server authentication.
Password The password for SMTP server authentication.
Send Notifications to Admin The email address to which the notifications should be sent. Typically,
this is the email address of the administrator.
To Next Page
Loading...
Need help?
General