Managing Users, Authentication, and VPN Certificates
374
ProSecure Unified Threat Management (UTM) Appliance
Note: You cannot delete a default group such as one that was
automatically created when you specified a new domain on the
second SSL VPN Wizard screen (see SSL VPN Wizard Step 2 of 6
(Domain Settings) on page 323). You can delete only the domain
with which the default group is associated and that has an identical
name as the default group (see Configure Domains on page 365).
Deleting the domain causes the default group to be removed.
Edit Groups
 To edit a VPN group:
1. Select Users > Groups. The Groups screen displays (see the previous figure).
2. In the Action column of the List of Groups table, click the Edit table button for the group that
you want to edit. The Edit Groups screen displays:
Figure 225.
With the exception of groups that are associated with domains that use the LDAP
authentication method, you can modify only the idle time-out settings. You can never
modify the Group Name and Group’s Auth Type fields.
3. Modify the idle time-out period in minutes in the Idle Timeout field. For a group that is
associated with a domain that uses the LDAP authentication method, configure the LDAP
attributes (in fields 1 through 4) as needed.
4. Click Apply to save your changes. The modified group is displayed in the List of Groups
table.
To Next Page
Loading...
Need help?
General