Managing Users, Authentication, and VPN Certificates
386
ProSecure Unified Threat Management (UTM) Appliance
 To modify user settings, including passwords:
1. Select Users > Users. The Users screen displays (see Figure 228 on page 379).
2. In the Action column of the List of Users table, click the Edit table button for the user for
which you want to modify the settings. The Edit User screen displays:
Figure 233.
3. Modify the settings as explained in the following table:
Table 99. Edit User screen settings
Setting Description
Select User
Type
From the drop-down list, select one of the predefined user types that determines the
access credentials:
• Administrator. User who has full access and the capacity to change the UTM
configuration (that is, read/write access).
• SSL VPN User. User who can log in only to the SSL VPN portal.
• IPSEC VPN User. User who can make an IPSec VPN connection only through a
NETGEAR ProSafe VPN Client, and only when the XAUTH feature is enabled (see
Configure Extended Authentication (XAUTH) on page 290).
• Guest User. User who can only view the UTM configuration (that is, read-only
access).
• PPTP VPN User. A user who can make a connection to the PPTP server only.
• L2TP VPN User. A user who can make a connection to the L2TP server only.
To Next Page
Loading...
Need help?
General